Giordano Colombo 2018-03-08T16:07:20+00:00

Project Description

Giordano Colombo

Spindle Repair and Rebuild

Giordano Colombo Spindle Repair and RebuildYour Giordano Colombo spindle is in expert hands with the factory-trained technicians at High Speed Technologies, Inc. We have repaired dozens of Giordano Colombo spindles to original factory performance. Need it fast? We can repair your spindle within three days of approval. All spindle repairs are backed by a complete warranty and our 30-year reputation of OEM-quality spindle repair.

Here are just some of the common Giordano Colombo spindle performance issues that we resolve:

  • Noisy bearings
  • Contaminated bearings
  • Increased vibration
  • Damaged shaft
  • Poor part finish
  • Failed seal
  • Shaft end play
  • Shaft seized
  • Excessive runout at Taper ID
  • Quill stuck in shaft
  • Preventative Maintenance

At HST, we replace all bearings with top name-brand ABEC 7 super-precision spindle bearings. Your spindle repair will minimally include replacing all seals, grinding bearing spacers for proper preload and restoration of damaged shaft surfaces. Then we perform high-speed balancing to eliminate vibration, extend spindle life and improve finish quality on parts. HST has provided the CNC machining community with a high-quality alternative to higher-priced OEM spindle repairs since 1986.

Giordano Colombo spindle repair and rebuild_2

Giordano Colombo after repair

This Giordano Colombo spindle was very contaminated with wood debris. The contamination migrated into the bearings causing excessive wear and catastrophic cage failure in bearing #3. The front bearings also showed signs of fretting and the rear bearings were very loose within the housing bore.

Giordano Colombo Spindle Repair and Rebuild_bearing failure

Catastrophic bearing failure

In the pictures below you can see how the wood debris worked its way into the spindle assembly, through the labyrinth cover and eventually into the bearings.

Giordano Colombo Spindle Repair and Rebuild_debris contamination

Wood debris migrated past through the labyrinth seal, contaminating the entire spindle assembly.

All bearings and seals were replaced with new. O-ring grooves were added to the rear housing bore for proper bearing fit. This Giordano Colombo spindle left High Speed Technologies performing great. Even the customer thought so! “It’s been installed and is performing great. Just wanted to say thanks for a job well done, and a speedy turn around.”

For expert Giordano Colombo spindle repair, please email or call us at 1-603-483-0333 for a free, no obligation quote. We are fast, experienced and our work is guaranteed!